2023 Krämer GP2-890R
Elite, hand-builT production race-ready Twin motorcycle
Pricing: $34,995 - For Competition Use Only
The Krämer GP2-890R starts with the same race-ready components as the HKR plus an upgraded 130hp KTM 890 engine, a superior braking and suspension package.
Frame: The Chromium-Molybdenum steel frame at the core of the Krämer GP2-890R is responsible for the handling and durability of these motorcycles. This superior material outperforms aluminum and is much less susceptible to cracking or breaking under the stresses of racing. The unique trellis design provides great stiffness, yet flexes where it is needed, and gives the rider unmatched feedback.
Tail section: The tail section of the GP2-890R is made of XPE plastic and works to support the rider and house 3.17 gallons of fuel. With this multi-use approach reduces weight and makes for a more compact package.
Body work: The fiberglass body work on the GP2-890R is extremely lightweight, with carbon/kevlar reinforcement. And by replacing the traditional gas tank with the airbox, the bike’s overall weight reduced, weight distribution is improved and the center of gravity is optimal for the track.
| 2023 Krämer GP2-890R | |
|---|---|
| Engine |
Four-Stroke, Twin-Cylinder, DOHC, 8-Valve, Liquid-Cooled |
| Displacement | 889 cm³ |
| Bore x Stroke | 90.7 mm x 68.8 mm |
| Compression ratio | 13.5:1 |
| Exhaust | Stainless Steel 2-1 |
| Fuel System | DKK Dell’Orto (Throttle body 46 mm) |
| Ignition | Bosch Engine Manangement with Ride-by-Wire |
| E-Start | Standard |
| Mapping | Adjustable Engine Braking and Throttle Map |
| Transmission | 6-Speed |
| Clutch | PASC Slipper Clutch, Hydraulically Actuated |
| Frame Type | Chromium-Molybdenum Steel-Trellis Frame, Powder Coated |
| Power | 130hp |
| Seat Height | Adjustable |
| Curb Weight | 309 lbs / 140 kg |
| Fuel Capacity | 16 Liters (4.2 US Gallons) |
| Triple Clamps | CNC-machined, 26mm or 28mm Adjustable Offset Triple Clamps |
| Steering Damper | Standard, Hyper Pro RCS |
| Final Drive | Chain, 520 AFAM 3D Racing |
| Front Suspension | Gabel/WP Apex Pro 7543, Closed-Cartridge, Fully Adjustable |
| Rear Suspension | WP Apex Pro 7746, Fully Adjustable, High and Low-Speed Compression, Remote Pre-Load Adjustment |
| Front Brakes | Dual 290mm Full-Floating Rotors, Brembo M50 Calipers |
| Rear Brakes | Single 230mm Rotor Full-Floating, Lightweight Brembo P2 Caliper |
| Front Wheel | Dymag UP7X 17x3.5, Forged Aluminum |
| Rear Wheel | Dymag UP7X 17x6, Forged Aluminum |
| Body | Fibreglass Fairing with Carbon/Kevlar Reinforcement (unpainted), XPE Fuel Tank/Seat |
| Handlebars | CNC Handlebar Clamps with Replaceable Tubes |
| Air Filter | Cleanable Racing Air Filter |
| Quickshifter | Standard, Up/Down |
| Frame Crash Pads | Standard |
| Fork Crash Pads | Standard |
| Brake Lever Guard | Standard |
| Adjustable Rear Ride Height | Standard |
| Safety Wired | Standard |
The Krämer GP2-890R is a race motorcycle designed only for competition-use. It cannot be used on public roads or highways, nor can it be registered to be street-legal.